K1 and K2 are 100S-C09 safety contactors in series on a 4 kW conveyor motor, the CROUT that drives them holds Fault Code 16#5003 – both feedbacks ON with the outputs off – through every press of the reset button, and the suggestion at 06:10 was to raise the Feedback Reaction Time from 100 ms … Read more
Count the safety functions before you pick the box. Where a 440R relay wins, where a 440C-CR30 takes over, and what a safety network adds to the job.
The 440R safety relay on the new guard, a 440R-S12R2, was showing PWR/Fault flashing red four times, IN steady red with the door shut, and the electrician had already swapped it for the spare, which did the same thing within a second of power-up. The guard switch is a single-contact tongue switch, and the link … Read more
The guard on the case packer came off its 440R-S12R2 on a Saturday and went onto a 1791ES-IB8XOBV4 under a GuardLogix 5580, same tongue switch, same two 100S-C09 contactors, and the first time the door was closed the DCS instruction reported Fault Code 16#4000 and would not take a reset. Channel A active, channel B … Read more