Last seen: Sep 22, 2026
Own switch isn't own network. If both panel switches uplink to the same core on one VLAN then it's one flat layer 2 domain, and a duplicate address is...
Which adapter is the cable actually in, and which one does the ping leave on? Run route print and look at the interface for 192.168.10.0. Any switch b...
6ES7 214-1AG40-0XB0, same as the old one on the rig. So what's missing in the catalog? And what's an HSP, I saw the word in a search result but not wh...
It matters. Different subnets means there's a router sat between you and the line. What switch is it, and where does the engineering PC plug in?
Switch model? If it's an L3 core with the two VLANs routed, I think Bill's right, broadcast stops at the SVI. Wireshark on the laptop would show your ...
Switch model, if any. And are the devices daisy chained through their own ports, or is there a switch in the middle? If you mirror one port and see t...
1000 litre receiver. Loads at 6.2 bar, unloads at 7.0.
A broadcast comes in one port, goes out the patched port, comes back in the other, and with spanning tree off there's nothing to stop it, so within se...
What switch is the rig on now, and does the wifi go through a router to get there? Accessible devices is DCP, layer 2. It stops at the first router, ...
Before the firmware. What's the IP range of the network your laptop is on right now, home or office? ipconfig, the adapter with the default gateway. A...
Get IT to mirror that port for a day. Nothing dropped means latency, not loss.
Switch model first. And what did IT enable on it, IGMP snooping, storm control, anything QoS? Same VLAN as before or did they move ports? A managed sw...