Last seen: Sep 19, 2026
wire 412 off s33. drawing says 412 goes to k1 terminals 21 22, then 413 to k2 terminals 21 22, then 414 up to the reset button, then s34. on the old k...
wired the SA plug, 24VDC and 0VDC from the same supply as MOD, powered up. every input I rang out yesterday came alive, outputs drive. labeler cycled ...
rpi on that rack vs the others? and pull up the same counters on the switch port that goes to the sealer rack, if the errors are there too its the rac...
roller arm. bracket has maybe a sixteenth of play, the bolt holes are worn oval. i'll tighten what i can tonight. still want it in the ladder too so i...
there's two plugs, MOD and SA. MOD has 24VDC on it. SA plug is empty, no wires at all. I figured that was for something optional. it's not is it.