Last seen: Sep 19, 2026
Is the watchdog basically a timer for how long one pass of the task is allowed to take?
Three entries: "Intel(R) Ethernet Connection I219-LM", "Siemens PLCSIM Virtual Ethernet Adapter", and "PLCSIM". I've only ever picked the first one.
Why would the loop hold at 100 after the temperature is already past setpoint? Isn't the error negative then?
Continuous. The IF is there because the first download gave me a type 4 code 20 array fault when i got to 50, so I put i back to 0 and that fault went...
Meter across the two panel wires with the switch disconnected reads 0.3 ohms so they are connected somewhere, but the old switch worked for years on t...
Cable's in the USB dongle, it shows up as "ASIX AX88179 USB 3.0 to Gigabit Ethernet". Direct to the CPU, no switch. Route print says 192.168.10.0 goes...
What's the External Access column for? I've never touched it. Not sure I get it.
so it's like the laptop shouting in one room and the PLC being in the next room with the door shut? Ok.
Is that the "Accessible from HMI" tick box thing? So if I've understood it, the DB has to be marked accessible, not just exist in the project?
So if I'm reading this right, the PLC expects the exact drive it was set up with and the new one's a different version, so it says no. Is that it?
Sorry, so the discrepancy time is how long the two contacts are allowed to disagree before it faults? So one contact is opening and the other is not, ...
Could the scan be too fast and the PLC counting the same bag on two scans? We had something like that on a line at college, or I think we did.