Forum

ok. So the sensor is fine and the input is fine, they just don't suit each other, and the resistor gives that leakage somewhere to go so the input see...

T0 for channel 0 and T1 for channel 1, that part I did not touch. In the JB it is a little strip with three terminals. Two channel wires come in from ...

Sensor datasheet says leakage current 1.5mA max. CPU manual table says 0 state max 5VDC at 1mA, 1 state min 15VDC at 2.5mA, though I'm not sure I'm on...