Last seen: Sep 22, 2026
All four done and written up. Two ACD files off the CompactLogix racks, a full station upload off the 315 with STEP 7 V5.6 including the hardware conf...
Found a U2DHP in the store, and RSLogix 500 is on the old desktop in the office along with STEP 7. So I can get at all four now. One thing I'm not su...
There is a card in it, yes, a little yellow one. The grey ones I looked up and 1747-L542 is a SLC 5 removed link No Ethernet port that I can see, ju...
Went round with a phone this morning. Panel 3 leftmost module says 1769-L33ER, and the one next to it is 1769-IQ16. Panel 7 is 6ES7 315-2EH14-0AB0, w...
Sorry, basic one. What is a shortcut in FactoryTalk actually pointing at?
Sorry if this is obvious, but does the gateway write down which block it lost, or just that a poll timed out?
Replaced it this morning with an 800FM mushroom E-stop operator, same 22 mm cutout, twist to release, on a yellow legend plate, with a two NC positive...
Ok. So two OTE rungs on the same output, MainRoutine rung 14 and Reject_Old rung 3, and the second one kept turning it back off. Asked the controls g...
Added the branch this morning. Start, let go, keeps running. Stop drops it. All three of us on the rig had the same rung, so it was never the button. ...
Assigned the name from Online access this morning. The IM went green after a few seconds and the IP changed to 192.168.2.11 on its own, I didn't touch...
So the relay latching isn't the same as the button latching, because they fail differently? And positive opening means forced apart, standard means sp...
Why does the shield help when the noise is on the motor leads and not on the Ethernet pair? I'd have thought the twist cancels it.
Uploaded to a new file, ran the compare. 14 rungs different, all in a new routine called R_MetalDet plus two tags, and one rung in the main routine ca...
Found it in the IM box under the leaflet, exactly where you said. Clipped it on, power cycle, IM green, all six modules green, conveyor section runnin...