Last seen: Sep 22, 2026
Swapped the two calls over. Trace shows the output in the same cycle as the input now, screenshot attached. It was the call order all along. The bit ...
Transmitter plus to 0+, transmitter minus to 0-, nothing else connected to it. Meter in series reads 0.0 mA. The old transmitter had four wires, two w...
So the drive is right and I'm the problem. I was stuck on the cable for two days. Why does the CPU stop sending, though? It's still powered and the PR...
Swapping the instruction on my rig tonight, mine reads UTC too then.
Both V16, Update 6 I think, whatever the lab image has. FB_Conveyor is from the course, we wrote it in class, no library.
This covers the same fault:/p>
Network 1: CALL FC_Sequence. Network 2: CALL FC_Sensors. Sensors last, because I wrote it last. Screenshot of OB1 attached.
Only on STOP. In RUN it ran an hour with nothing, so I think it's tied to the STOP. The CPU buffer at that time just says "CPU changes from RUN to STO...
New instance DB_Valve2 on the second call. Valve 2 opens on Q0.1 only, valve 1 stays where it was, both timeouts run separately. Screenshot attached. ...